AC05 Safety (AC05..CS)
www.vishay.com Vishay Draloric
Revision: 28-Oct-14 1Document Number: 28894
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Axial Cemented Fusible Wirewound Safety Resistor
FEATURES
• UL1412 recognised fusible wirewound resistor;
UL file no. E362452
• Surge voltage handling capability: 4 kV (10 to
20 ) and 6 kV (22 to 100 ) as per
IEC 61000-4-5
• Fusing time < 45 s for 100 W overload
• Sn coated Cu termination wires
•P40 = 5 W
• Ohmic range: 10 to 100 , 5 %
• Non-flammable silicon cement coating for immediate
interruption without flame and explosion when AC mains
voltage (230 VAC) is applied
• Specially designed for applications in electric appliances,
energy meters
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
AC05 safety resistor (AC05..CS) is designed to be used as fusible safety resistor (or, AC mains voltage input resistor). It uses
specially selected resistive winding wire and special non flammable silicon cement coating material to ensure safe and silent
fusing operation in overload conditions. The resistor fuses “without a bang” when AC mains voltage is applied. At the same
time, it acts as a in-rush current limiting resistor for the normal operation. The specially developed lacquer coating has superior
thermal and electrical insulating properties of standard silicone cement. This allows designers to more easily meet the
requirements of safety approval, whilst eliminating the need to put additional fuses in series with the input resistor.
Note
(1) Resistance value to be selected for ± 5 % from E24 series
DIMENSIONS
STANDARD ELECTRICAL SPECIFICATIONS
MODEL
POWER RATING
P40 °C
W
POWER RATING
P70 °C
W
LIMITING
VOLTAGE
Umax.
RESISTANCE RANGE (1)
TCR = ± 200 ppm/K
TOLERANCE
%
AC05..CS 5 4.5 10 to 100 ± 5
P x R
BA
G
C
DIMENSIONS in millimeters
MODEL A MAX. B MAX. C G WEIGHT PER UNIT
g
AC05..CS 18 10 0.8 ± 0.03 83 ± 1;
93 ± 1 2.5
AC05 Safety (AC05..CS)
www.vishay.com Vishay Draloric
Revision: 28-Oct-14 2Document Number: 28894
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
FUNCTIONAL PERFORMANCE
PART NUMBER AND PRODUCT DESCRIPTION
Part Number: AC050000B1000J6BCS
MODEL VERSION TCR/MATERIAL RESISTANCE TOLERANCE PACKAGING SPECIAL
AC05000 0 = Neutral 0 = Neutral,
A = 4 kV
B = 6 kV
3 digit value
1 digit multiplier
MULTIPLIER
9 = *10-1
0 = *100
1 = *101
J = ± 5 % 6B = 250 pieces,
box: 83 mm
6F = 250 pieces,
box: 93 mm
CS = Safety
resistor
Product Description: AC05 100R 5 % 6 kV 6B G83 CD1402
AC05 100R 5 % 6 kV 6B G83 CD1402
MODEL RESISTANCE TOLERANCE TCR/
MATERIAL PACKAGING TAPE WIDTH SPECIAL
PACKAGING TABLE
MODEL BOX
DIMENSIONS PIECES PACKAGING CODE
AC05..CS 83 mm 250 6B
93 mm 250 6F
40 70
0
20
40
60
80
100
120
- 40 50 100 150 200 250
AMBIENT TEMPERATURE IN °C
RATED POWER IN %
0
DERATING
5000 B100C0 0J6 S0A CB
AC05 Safety (AC05..CS)
www.vishay.com Vishay Draloric
Revision: 28-Oct-14 3Document Number: 28894
For technical questions, contact: ww1resistors@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• Surge voltage handling capability: 4 kV (10R to 20R) and 6 kV
(22R to 100R) as per IEC 61000-4-5
Notes
• Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99912
• For further information, please contact: ww1resistors@vishay.com
RESISTANCE VALUE (Ω)
ENERGY IN JOULES
PULSE ENERGY CURVE FOR AC05..CS
0
10
20
30
40
50
60
10 10033 39 47 56 62 6875 829122
FUSING CHARACTERISTICS
OF AC05..CS: 10 Ω ≤ R ≤ 100 Ω
FUSING TIME IN s
OVERLOAD POWER IN W
100 200150 2500
0
10
20
35
40
50
60
PERFORMANCE
TEST PERMISSIBLE CHANGE (R)
Climatic Category (LCT/UCT/Days) 40/200/56
Climatic Sequence, IEC 60115-1, 4.23 ± (1 % R + 0.05 )
Damp Heat, Steady State, IEC 60115-1, 4.24
(40 ± 2) °C, 56 days, (93 ± 3) % RH ± (5 % R + 0.1 )
Endurance at Room Temperature (116 % P70), 1000 h,
IEC 60115-1, 4.25.2 ± (5 % R + 0.1 )
Endurance at UCT, 200 °C (30 % P70), 1000 h, IEC 60115-1, 4.25.3 ± (5 % R + 0.1 )
Resistance to Soldering Heat, IEC 60115-1, 4.18
(260 ± 5) °C, (10 ± 1) s ± (0.5 % R + 0.05 )
Robustness of Termination, IEC 60115-1, 4.16 ± (0.5 % R + 0.05 )
Short Time Overload, IEC 60115-1, 4.13
10 x Rated Power (P40) for 5 s ± (2 % R + 0.1 )
1.2 μs/50 μs Surge Test (Impedance of Surge Tester is 2 )
as per IEC 61000-4-5; 10 Pulses at 30 s Interval ± (5 % R + 0.1 )
Fail Safe Mains Fusing at 230 VAC Resistance > 100 k, fusing time < 2 s
(fusing without flame and explosion)
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 13-Jun-16 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of
typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding
statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a
particular product with the properties described in the product specification is suitable for use in a particular application.
Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over
time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk.
Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for
such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document
or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
